Many rubber compounders run into headaches with fine free-flowing additives such as calcium oxide, SI69, uniforming agents and vulcanization accelerators. Standard VFFS machines often cause particle breakage or struggle to keep stable weighing accuracy for these low-density materials.
We built this complete VFFS packaging system specifically for these difficult fine granular chemicals. It also works well with EVA low melting film packaging for rubber granule.
The line is fitted with a Z-type material elevator paired with a vibratory feeder. It automatically lifts and feeds granules continuously into the weighing section. No workers need to shovel or refill material manually, which greatly cuts labour cost on your packaging floor.
The gentle bucket transport design protects granules and keeps breakage to a minimum.
Four separate weighing units are installed on this VFFS system. The filling error of each finished bag can be controlled within 30 grams. Stable weight control matters a lot for rubber compounding. It helps you avoid over-dosing or under-dosing additives that would ruin your rubber formula.
It maintains reliable performance even when the bulk density of your additives has minor changes.
A heavy-duty service platform comes with the whole set. Your technicians can stand on it to check, calibrate and maintain the four weighing scales easily.
Daily inspection and routine servicing become straightforward, helping you reduce unexpected downtime during production runs.
After bags are formed, filled and sealed, finished bags come out via the outfeed conveyor. You can connect this conveyor directly to ton bag packing station or carton packing station.
The whole workflow runs fully automatic: raw material feeding → weighing and metering → bag forming and sealing → finished bag output. If you want to arrange a trial before purchase, check our VFFS machine test service.
One standout feature of this VFFS packaging line is its reliable compatibility with EVA low melting roll film. Bags made from this film can be loaded directly into your Banbury mixer.
The EVA film melts completely during mixing and leaves no unwanted residue inside your rubber compound. If you are still purchasing pre-made EVA pouches, switching to roll film on this VFFS unit will bring obvious savings on packaging material cost.

Yes. We tune sealing temperature, film pulling speed and jaw pressure specially to suit EVA low melting film, widely used for rubber additives that feed directly into Banbury mixers.
The system controls filling error within 30 grams per bag for fine rubber additive granules, carbon black and pyrolysis carbon black.
The Z-type bucket elevator adopts gentle bucket transfer instead of screw pushing. It is selected specifically for applications requiring low particle breakage.
Yes. The outfeed conveyor is reserved for connecting downstream ton bag stations or carton packaging machines. We can adjust the layout based on your workshop dimensions.
It is optimized for free-flowing fine chemical granules. Main applications cover rubber additives, calcium oxide, SI69, vulcanization accelerators, carbon black and pyrolysis carbon black.