If you pack construction glue, waterproof latex emulsion, liquid coating or other thick paste materials, this vertical form fill seal machine will be a solid upgrade for your production line. It turns out clean, good-looking finished pouches, helps you speed up output and bring down your overall packaging expense.
This all-in-one VFFS unit handles the full packaging sequence automatically: feeding roll film, forming bags, filling liquid or paste, heat sealing and discharging finished bags. It’s built to take over manual packing work, so your plant can run fully automated packaging. Stable operation means higher daily output and much less spending on labor.
All parts touching your raw material or packaging pouch are made from stainless steel or food-contact compliant materials. This keeps your liquid and paste clean, avoids cross-contamination and meets hygiene requirements.
We use standard PLC control paired with a touchscreen HMI. Operators can learn to run it quickly. The whole machine runs steady, with low failure rates and reasonable power draw. Its integrated circuit design delivers reliable mechatronic performance.
It comes with built-in sensors for self-check and real-time feedback. When there is no roll film during running, the system will trigger an alarm and stop automatically. Operators can see live machine status on the screen, and fault alerts stop the machine before you waste raw materials or mess up the working area.
We designed this machine to run on affordable single-layer PE roll film. Roll stock costs less than pre-made bags, and the consistent heat seal also makes your end product look more professional on the market.
Three different models cover different filling ranges. Pick from ≤6kg, ≤15kg and ≤25kg per bag to match your construction chemical packing job.
Extra flexible application: It also supports EVA low-melting film application. You can feed the pouches directly into the next process without unpacking the bags, which brings extra flexibility for your production.
| Item | JSD-600 | JSD-800 | JSD-1000 |
|---|---|---|---|
| Bag Size | W:260mm; L:100~700mm | W:360mm; L:100~700mm | W:460mm; L:100~700mm |
| Max Filling Weight | ≤6kg/bag | ≤15kg/bag | ≤25kg/bag |
| Packing Speed | 2–6 bags/min | 2–6 bags/min | 2–6 bags/min |
| Suitable Product | Liquid / Paste | Liquid / Paste | Liquid / Paste |
| Packaging Film | Single-layer PE Roll Film | Single-layer PE Roll Film | Single-layer PE Roll Film |
| Main Machine Material | Carbon steel / Stainless steel for key & exterior parts | Carbon steel / Stainless steel for key & exterior parts | Carbon steel / Stainless steel for key & exterior parts |
| Power Supply | 3-phase 380V, 50/60Hz, 3KW | 3-phase 380V, 50/60Hz, 3KW | 3-phase 380V, 50/60Hz, 3KW |
| Compressed Air Requirement | 500N L/min, 6kg/cm² (to be supplied by buyer) | 500N L/min, 6kg/cm² (to be supplied by buyer) | 500N L/min, 6kg/cm² (to be supplied by buyer) |
| Overall Dimension | 1040×940×2300mm | 1040×1040×2300mm | 1140×1040×2300mm |
| Net Weight | 350 Kg | 400 Kg | 400 Kg |
| Conveyor Dimension | 2700×500×790mm | 2700×500×790mm | 2700×600×790mm |
This vertical bagger fits construction chemical factories, coating plants and waterproof material manufacturers perfectly. It handles construction adhesive glue, waterproof emulsion, architectural liquid paint, thick slurry paste and similar viscous materials.
A: It is built for single layer PE roll film. This film type is widely used for construction chemical liquid packing, seals well and keeps your material cost low. Compatible with EVA low-melting-point film for direct in-bag feeding, no unpacking required.
A: Yes. The film sensor will pick up empty film status, trigger an alarm and halt automatically. This stops empty filling and prevents raw material loss.
A: Compressed air is required for operation. The buyer needs to prepare the air compressor by themselves, at 500N L/min, 6kg/cm².
A: Choose based on your target bag weight. JSD-600 for up to 6kg, JSD-800 for up to 15kg, JSD-1000 for up to 25kg per pouch. Send us your packing sample and requirement and we can give you honest advice.
A: Absolutely. It is designed specifically for liquid and viscous paste like waterproof latex and construction glue, not limited to thin water-like liquid.
A: Yes. When using EVA low-melting film, pouches can go straight to next process without unpacking, saving extra handling steps.

Reach out with your packing specs, we can share running videos and a formal quotation. We provide overseas technical guidance and after-sales support.